Sunma ST-950 Ribbon Fiber Fusion Splicer

Sunma ST-950 Ribbon Fiber Fusion Splicer

Both power sources, AC adapter and battery, are available. The portable capability of the 950 has been improved using the slot-in AC adapter/battery. Newly developed FFES optical system provides high speed splicing

Specifications

SUNMA ST-950 Ribbon Fiber Fusion Splicer


Features:
 Both power sources, AC adapter and battery, are available.
  The portable capability of the T-65 has been improved using the slot-in
AC adapter/battery.
  Newly developed FFES optical system provides high speed splicing
and clear fiber image, which allows visual check. (FFES-Full fiber in Focus in Equal Size)
  Newly developed heater is capable of high speed heating operation.
  30 consecutive splicing/heating operation with one fully charge battery.
  The mounting of a large wind protector enables splicing operation in 15m/s strong wind.
  5.6 inch large TFT color monitor provides clear fiber image even in direct sunlight.
  Protection glass attached to mirror gives you much easier cleaning and maintenance.
  White LED illumination enables identification of a ribbon color and fiber loading even at dark places.
  Automatic arc test insures an optimum arc is achieved for various environmental conditions, as well as splicing different manufactures fiber.
 
Specifications

Applicable fiber
Material
Silica glass
Fiber type
Single mode (SMF)
Multi-mode (MMF)
Dispersion shifted (DSF)
Non-zero dispersion shifted (NZ-DSF)
Fiber diameter
125um
Cleave length
10mm
Number of fibers
Single fiber (0.25, 0.9mm),
2~12 fiber ribbon
 Standard performance (Typical)
Splice loss (Identical fibers)
SMF fiber 0.05dB
MMF fiber 0.03dB
DSF fiber 0.07dB
NZ-DSF fiber0.05dB
Splice cycle time
30 sec (12-fiber ribbon)
Heater cycle time
75 sec (8-fiber ribbon)
Splice cycle per full charge of battery
20 cycles (12-fiber ribbon,
including heater, using JR-5)
Splice programs
48 (max.)
Heating Programs
10 (max.)
Functions
- Splice loss estimation
- Splice data storage (250 splicing)
- Fiber condition data storage
- Screening of spliced portion (Tension 1.96N(200gf))
- Built-in high speed heater for thermal protection (Applicable for 40, 60mm sleeve)
- Arc test (With environmental effect compensation function)
- V-groove guide
Dimensions
Size
150(W) x 150(D) x 150(H) mm
Weight
Approx. 3kg
Monitor display
5.6-inch large TFT color monitor
Power supply
AC 100-240V, (50/60Hz)
DC 12V

 
Standard package
Item
Quantity
Type
Main body
1pc
Type-65
AC adapter/battery recharger)
1pc
PS-65
Battery
1pc
BU-65
Battery Charger Cable
1pc
BCC-65
High Precision Cleaver
1pc
FC-6m
AC power cord
1pc
PC-AC2
V-groove brush
1pc
VGB-003-CR
Spare electrodes
1 pair
ER-7
Thermal Jacket Remover
1pc
JR-5
12 V DC P, ower Cord,  From Splicer  to JR4A, JR-5, or HP-5.
1pc
PC-2
Fiber Holders
1 pair
RH-250 ,RHS-06 or RHS-12
Monitor cover
1pc
----------
Operation manual
1pc
----------
Carrying case
1pc
----------
Cooling Tray
1pc
----------


Our Sumitomo Type-65 mass fusion splicer standard package:
a) Arc Fusion Splicer Model: TYPE-65-1pc
b) AC adapter / Battery charger / DC inlet Model:PS-65 1pc
c) Carrying case Model: 1pc
d) Monitor cover Model: 1pc
e) AC power cord Model: PC-AC4 -1pc
f) Spare electrodes Model: ER-7 - 1pair
g) Instruction manual - 1pc
h) High precision fiber cleaver Model: FC-6M - 1 pc
i) Detachable battery pack Model: BU-65 -1 pc
j) Battery charge cord Model: BCC-65 - 1pc
k) Thermal jacket stripper Model: JR-5 - 1pc
l) Optional fiber holders Model: TH-12 - 1pair

One year warranty from us!