SM-160 V-goove Fiber Aligner

SM-160 V-goove Fiber Aligner

1) splice loss, and good consistency. 2) small size, light weight, easy to operate. The main technical indicators: Applicable fiber: single fiber; fiber diameter: 125m; For core loss: 0.05dB no more than a single fiber loss Working temperature: -10 ~ 40 Dimensions: 108mm 60mm 52mm

Specifications

FM-160 Single Fiber Aligner

The main features
1) splice loss, and good consistency.
2) small size, light weight, easy to operate.

The main technical indicators:

Applicable fiber: single fiber; fiber diameter: 125m;
For core loss: 0.05dB no more than a single fiber loss
Working temperature: -10 ~ 40
Dimensions: 108mm 60mm 52mm
Weight: 350g

Procedure:

1) Early 30 minutes turn the light source and the tester.
2) Turn the knob to align activity adjusted farthest end position.
3) single-core multimode pigtail FC head end and multi-channel tester connected, followed by holding the other end of the fiber stripping pliers with a single fixture, clean bare fiber and cutter, cut back on the single fiber alignment the fixed end (left end), bare fiber accurately into the groove.
4) The DUT single fiber with single holder holding pliers in order to use fiber stripping, cleaning bare fiber and cutter, cut back on the activities of single fiber aligners end (right end), bare fiber accurately into the groove after a drop in the middle of the V-grooves matching liquid, and then the pressure on the ram slightly.
5) Turn the knob counter-clockwise, so that the movable end is free to move so that V groove fiber automated docking, and then observe the tester, you can test the device under test indicators.

Configuration Checklist:

Standard configuration                             

Name

Model

Quantity

Single fiber aligners

FM-160

1

Matching fluid

 

1

Single Fixture

250-R/250-L

2